We are manufacturers of Cobalt Acetate Tetrahydrate and Pharmaceutical Excipients in India. We offer Halal and Kosher product made in an ISO9001, ISO22000 (FSSC22000) cGMP and GLP certified facility. The units have one or more of the certifications like FDA GMP-GLP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal
Cobalt Acetate Tetrahydrate SDS MSDS of Manufacturers Suppliers Exporters
Cobalt Acetate Tetrahydrate: CAS Number: 6147-53-1 (Anhydrous is 71-48-7), EINECS EC Number: 200-755-8, Molecular Formula: (CH3COO)2Co-4H2O, Molecular Weight: 249.08
Specifications of Cobalt Acetate Tetrahydrate: Manufacturers Suppliers Exporters
Cobalt Acetate Tetrahydrate SDS, Safety Data Sheet
MSDS, Material Safety Data SheetSection 1: Product and Company Identification
Product Name & Other Names: Cobalt acetate tetrahydrate, Cobaltous acetate tetrahydrate,
CAS No.: 6147-53-1
EINECS, EC Number: 200-755-8
Molecular Weight: 249.08
Chemical Formula: (CH3COO)2Co-4H2O
Relevant uses and uses advised against (if any): Industrial and laboratory use.Section 2: Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008Acute toxicity, Oral (Category 4), H302
Skin irritation (Category 2), H315
Eye irritation (Category 2B), H320
Skin sensitization (Category 1), H317
Carcinogenicity (Category 2), H351Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements
IrritantGHS Label Elements
Health HazardSignal Words: Danger
Hazard statements:
H302: Harmful if swallowed.
H315 + H320: Causes skin and eye irritation
H317: May cause an allergic skin reaction.
H351: Suspected of causing cancer.Precautionary statements:
P202: Do not handle until all safety precautions have been read and understood.
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264 Wash thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P362: Take off contaminated clothing and wash before reuse.
P330 : Rinse mouth
P301+P312: IF SWALLOWED: Call a POISON CENTER or doctor/ physician if you feel unwell.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P304+341: IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308+313: IF exposed or concerned: Get medical advice/attention.
P501: Dispose of contents/container in accordance with local/regional/national/international regulation.Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbols:
Xn Harmful
Xi Irritant
Risk Phrases:
R22 Harmful if swallowed.
R36/38 Irritating to eyes and skin.
R43 May cause sensitization by skin contact.
R45 May cause cancer.Section 3: Composition / Information on Ingredients
Product Name & Other Names: Cobalt acetate tetrahydrate, Cobaltous acetate tetrahydrate,
CAS No.: 6147-53-1
EINECS, EC Number: 200-755-8Section 4: First Aid Measures
Always seek medical attention after first aid measures are provided.
Eyes: Immediately flush eyes with excess water for 15 minutes, lifting lower and upper eyelids occasionally.
Skin: Immediately flush skin with excess water for 15 minutes while removing contaminated clothing.
Ingestion: Call Emergency Medical immediately. Rinse mouth with cold water. Give victim 1-2 cups of water or milk to drink. Induce vomiting immediately.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration.Section 5: Fire Fighting Measures
It is non-flammable solid. When heated to decomposition, emits acrid fumes.
Protective equipment and precautions for firefighters: Use foam or dry chemical to extinguish fire. Firefighters should wear full firefighting turn-out gear and respiratory protection. Cool container with water spray.
Special hazards arising from the substance: Fumes, Carbon and Cobalt oxides.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.Section 6: Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Avoid dust formation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container.Section 7: Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Do not store with incompatible materials like strong oxidizing agents.Section 8: Exposure Controls / Personal Protection
Exposure guidelines: Not established by any regulating agency.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible.
Other Control Measures: Maintain good housekeeping in work area. Maintain eye wash fountain and quick-drench facilities in work area.Section 9: Physical and Chemical Properties
Physical state and appearance: Solid. (Pink to Red Crystals or Powder.)
Odor: Odorless.
Odor threshold: Not available.
pH: Not available.
Relative density: 1.7
Melting point/freezing point: Not available.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: No information found.
Decomposition temperature: No information found.
Upper/lower flammability or explosive limits: No information found.
Vapor pressure: No information found.
Vapor density: No information found.
Evaporation rate: No information found.
Flammability (solid, gas): No information found.
Partition coefficient: n-octanol/water: No information found.
Solubility: Soluble in water.
Viscosity: No information found.Section 10: Stability and Reactivity
Avoid heat and ignition sources.
Stability: Stable under normal conditions of use and storage.
Incompatibility: Heat and strong oxidizing agents.
Shelf life: Indefinite if stored properly.
Hazardous Decomposition Products: Carbon oxides, fumes and cobalt/cobalt oxides.
Hazardous Polymerization: Has not been reported.Section 11: Toxicology Information
LD50 [oral, rat]; 708 mg/kg; LC50 [rat]; N/A; LD50 Dermal [rabbit]; N/A
Carcinogenicity: Group 2B: Possibly carcinogenic to humans by IARC.
Mutagenic Effects: Not available.
Developmental Toxicity: No information found.
Reproductive Effects: No information found.Section 12: Ecological Information
Toxicity to fish: LC50 - Not Available.
Ecotoxicity (aquatic and terrestrial): Contains a heavy metal – toxic to terrestrial and aquatic plants and animals. Do not release to environment.
Persistence and Degradability: Unlikely to persist due to water solubility.
Mobility: Likely to be mobile due to water solubility.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No data available for assessment.Section 13: Disposal Considerations
Check with all applicable local, regional, and national laws and regulations.
Section 14: Transport Information
DOT USA & ADR/RID Europe: Not dangerous goods
IATA/ICAO
UN-No: UN3077
Proper Shipping Name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S.
Hazard Class: 9; Packing Group: III
IMDG/IMO
UN-No: UN3077
Proper Shipping Name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S.
Hazard Class: 9; Packing Group: IIISection 15: Regulatory Information
USA:
SARA 311/312 Hazard Categories: See section 2.
California Prop. 65 Components: Not listed.Section 16: Other Information
European Labeling in Accordance with EC Directives:
H302: Harmful if swallowed.
H315 + H320: Causes skin and eye irritation
H317: May cause an allergic skin reaction.
H350: Suspected of causing cancer.Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************Manufacturers Suppliers Exporters
Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264e-mail: anmolc@mtnl.net.in
Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Vietnam, Korea, Japan, etc.
Copyright and Usual Disclaimer is Applicable. 19 January, 2022